How to work out your electricity costs and save

By Michael Franze, managing director at Citiq Prepaid

How to work out your electricity costs and saveNew electricity rates kicked in on 1 July, with municipal electricity tariffs increasing by around 13% to 16%.

Understanding how electricity tariffs work is the first step towards taking charge of your spending.

Unfortunately, the exact details of how any particular electricity bill is calculated can be so complex it’s difficult for even experts to understand. In the long term the real solution is for Eskom, municipalities and the National Energy Regulator to design simpler consumer tariffs. But in the meantime, there are three basic pieces of information that can help consumers to make sense of their electricity bills.

Eskom or municipality?

Firstly, your charges will vary depending on where you live. If you get your power directly from Eskom, which is the case in many rural areas and in Soweto, for example, you will be charged according to a different system than if you get your electricity from a municipality. And each municipality has its own system as well. For example, in Cape Town people with homes valued at over R1m pay a basic home user charge that covers the cost of keeping them connected, no matter how much power they use; some municipalities like Ekurhuleni have different tariff systems depending on how much a household uses in a month; and different municipalities charge different rates for a unit of electricity. So it’s important to check what your own municipal system is.

Beware the Incline Block Tariff (IBT)

It’s helpful to understand the incline block tariff (IBT) system. Basically, this means that the more electricity you buy in a month, the more you pay per unit of electricity. In the case of prepaid customers, it has nothing to do with how much you actually use — the cost is purely based on how much you buy. This means that electricity is one of the rare cases where it’s really not a good idea to buy in bulk. Rather buy from week to week, or buy just enough at the beginning of each month to keep you going. It’s cheaper to top up with a few units at the end of each month than to buy enough to last you for two months.

How much electricity do your appliances use?

Understand exactly what you are getting when you buy a unit of electricity. The terms can get confusing, but when you break it down it’s actually quite simple. The amount of power any appliance uses, also called its power rating, is measured in Watts (W), and this is always marked on the packaging or somewhere on the appliance. So, an energy-saving lightbulb might use 20W and an iron would be around 1 000W or 1 kiloWatt (kW), for example. A unit of energy, which is measured in kiloWatt hours (kWh), is just the amount you need to run a 1kW appliance like an iron for one hour. So your unit will last a long time if you’re using appliances with a low power rating, or get used up really fast if you’re using more power-hungry appliances. A good general rule is that the more heat an appliance generates, the more power it uses.

This means there are two ways to save electricity. The first thing to do is choose appliances with a lower power rating. For example, if you leave a 100W traditional light bulb on for a whole week, which is 168 hours, you’ll use nearly 17 units of electricity. If a unit costs 150c, then it works out to about R25.50 to keep that one light bulb burning for a week. If you change to a 4W LED energy saver bulb, you’ll use just over 0.6 units in the same week, and spend about R1c. ‒ a saving of R24.

The second way to save is to use each appliance for fewer hours. Fridges, freezers and alarm systems are the only things in most houses that need to be on all the time. With everything else, the less you use the more you’ll save. Switching things like TVs and DVD players off at the wall when you’re not using them is one of the easiest ways to save.

Once you’ve switched off appliances that stay in standby mode, look at the things which use most power: stoves, ovens, geysers, kettles, irons and heaters. For example, even the most efficient wall panel heater uses 400W an hour, which is nearly R2,50 a day if you use it for four hours. A two-bar infrared heater will cost twice as much. Closing the curtains to keep the heat in, and putting on a jersey instead of turning on the heater, could potentially save hundreds of rands a year.

A wonder box cooking grains, rice, potatoes, beans and other dishes that need slow cooking saves on electricity. There are many other ways to save electricity, and we should all start becoming more familiar with them. For our wallets and for the planet, we need to start using energy more efficiently.

This article first appeared in City Press.

1 CommentLeave a comment

  • Hello with regards to not buy electricity in bulk does this include for landlords pretty meters as well.
    In other words we rent a house and our landlord has 2 pre paid meters as we are 2 household…..

Leave a Reply

Your email address will not be published. Required fields are marked *